0

Alan Gibson Wheels and Bearings
EM Gauge (18.2mm)
OO Gauge (16.5mm)
P4/S4 Gauge (18.83mm)
Cooper-Craft
Cooper-Craft 4mm Lineside
Cooper-Craft 16mm Wagons
Cooper-Craft 16mm Lineside
4mm Accessories
4mm Lineside
Wagon Bogies
Etched Tie Bars
Misc. Accessories
Underframe Kits
4mm Cambrian Wagon Kits
4mm Transfers
4mm Transfers Pre-Grouping
4mm Transfers SR
4mm Transfers LMS
4mm Transfers LNER
Private Owner
SR Pre Grouping (LBSC, LSWR, SECR)
SR
LNER
LMS & MR
GWR & Cambrian
BR Salmons and Borail
BR Steel Carriers
BR Engineering
BR Open Wagons
16mmNG
Axleguards
Bogies
Brakegear
Lineside
Loco and Rolling Stock Parts
Signal Parts
Transfers
Wheels
Cooper-Craft Wagon Kits
3mm Wagon Kits
Metal Materials
Brass Micro Section
Brass Flat Section
Brass L Section
Brass T Section
Brass U Section
Brass Z Section
Brass Half Round Section
Brass Half-Round Tube Section
Brass Square Profile
Metal Bar or Rod
Brass Square Bar
Brass Round Bar or Rod
Metal Strip
Brass Strip 0.2mm thick
Brass Strip 0.5mm thick
Nickel Silver Strip 0.3mm thick
Phosphor Bronze Strip 0.15mm thick
Phosphor Bronze Strip 0.3mm thick
Metal Wire
Brass Wire
Phosphor Bronze Wire
Nickel Silver Wire
Soft Iron Wire
Metal Tube
Metal Sheet
Nickel Silver Sheet
PECO-Parkside
4mm Scale OO Gauge Parkside Wagon Kits
Special Orders

C5 GWR 6ton Crane & Match Truck

£22.00
Pre-order
Out of stock, available for pre-order
Product Details
Brand: Cambrian
Wheel Type required:: 12mm 8 Spoked (Truck) & 12mm 10 Spoked (Crane)
Paint required:: See Instruction Sheet
Transfers required:: See Instruction Sheet
Other items required:: Couplings and dummy Coupling Hooks.
Price Code: H
Weight: 52g

Includes specially imported fine chain. The toolbox lids can be modelled in the open position.

The jib can be modelling for travelling or lifting. Choice of semi-enclosed / enclosed (BR) gear wheels. The crane requires 12mm 10 spoke wheels and the match truck 12mm 8 spoke wheels.
PROTOTYPE: this type of crane was used by the GWR from the end of the 19th century. There were variations in the design, earlier ones having ropes and pulleys to raise the jib. A Swindon drawing shows Dean-Churchward brake-gear, but we have not seen photographic evidence of this. The cranes were used at small goods yards that didn't have a suitable yard crane. Whether they travelled to the yard with the loaded/empty wagons, or were sent in advance isn't known, as photographs are rare. They were also used at P.W. depots, where the last of them lasted into the 1980s (e,g, Hereford). Known locations were Aberystwyth, Hatton, Hereford, Machynlleth, Old Oak Common, Paddington, Pilning and Yate.

In 1948, two cranes were heavily modified with new jibs that were mounted horizontally on top of the "body". These went the opposite way to the origins, over the rear weight box. The pair of cranes were either side of a wagon with a small cabin and probably a generator. This was an early track relaying "machine" for use in the Severn Tunnel. It/they were at Bristol East Depot in the early 1980s.

Known numbers are 237, 240, 242, 244, 249, 250, 443, 445, 446 & 454. The match truck carried the same number, but in BR days the pairing was mixed, perhaps due to wagons being scrapped. There are photos in 'A Pictorial Record of GW Wagons' by J.H. Russell (OPC 1971/5). There is a photo of a 10ton hand crane working at Staverton Bridge in 'The Country Railway' by D. St.John Thomas (D & C 1975 + later reprint). Dimensions of this kit were taken from the crane on the Dean Forest Railway, and the match truck on the West Somerset Railway, and from drawings loaned by D. Hyde (who also loaned photos).

We stock wheels for this kit in OO, EM and P4/S4. Please note the wheels for the match truck are different to those of the crane.

LINK TO PDF INSTRUCTION SHEET

Save this product for later
Share this product with your friends
C5 GWR 6ton Crane & Match Truck
Share by: